Fablab Safety


1. Students are not allowed to enter and work in any laboratory or workshop in the absence of the lecturer-in-charge or Technical Supporting Officer (TSO).
2. Students must be properly attired according to the guidelines below :
a) Collared shirt or T-shirt and full-length trousers.
b) Do not wear loose-sleeved clothing and jewellery.
c) Do not use compressed air to clean your clothing.
d) Covered shoes must be worn at ALL time – NO open tops or open toes.
e) Students with long hair must tie up their hair to avoid entanglement with rotating machinery.
f) Certain laboratories and workshops required the use of additional safety equipment and Personal Protective Equipment (PPE) such as goggles, safety glasses, masks, gloves, ear plugs/earmuffs as instructed to protect against any workplace and machine hazards.
3. Know the location of all fire escape exits and assembly area.
4. Do not operate machines or equipment until you have been properly instructed by your lecturerin-charge or TSO.
5. Do not tamper with all safety devices and machine guards.
6. Report any UNSAFE conditions or UNSAFE acts to your lecturer-in-charge or TSO

IN CASE OF EMERGENCIES:
1. Do not panic.
2. Quickly and calmly inform the lecturer-in-charge or TSO or follow the SP’s Three-step Emergency Procedure:
a) For ambulance or fire brigade, call 995
b) Instruct them to enter Gate 1 (Main Entrance) along Dover Road
c) Inform Campus Security by calling 6772-1234 for all emergencies and incident reporting.
3. Be familiar with the evacuation route and designated assembly area for the laboratory or workshop you are working in. These are posted on exit doors or at convenient location(s) within the laboratory or workshop.


Some Tools


1. Safety Shoe
2. Safety Eyewear
3. Safety Earplugs
4. Safety Gloves
5. Welder Box 30"x12"x16"
6. Screwdriver Set
7. Stanley Pliers
8. Stanley Dynagrip Snap/Off Blade Knife
9. Measuring Pocket Tape (3-10m)
10. Safety Soft-face Hammer
11. Stepladder (6')
12. Hitachi Cordless Drill 10.8V
13. Hitachi Jig Saw
14. Angle Grinder
15. Palm Sander 240W
16. Hydroshot Portable Pressure Cleaner